This Howto is available in other formats. Preferably downloadable: documentation tarball. You may find this Howto as part of the Linux Documentation Project.
Looking for other languages? See the German version, then! And as of march 2003 there is a french version available with courtesy of Fran�ois Romieu and Guillaume Lelarge: French version. Today, some day in july 2005, I stumbled across an italian version of this HOWTO! Unfortunately there's no translator's note in the document, courtesy is unbeknownst so far: Italian version.
Added link to italian version of this HOWTO (see above). Plus a section about making the changes reboot-persistent, a note about 2.6 kernel not working as expected and the user experiences-section. Included the Final note-section. :)
Unfortunately, the linux documentation project does not respond actively to update requests. This results in an outdated version of the on www.tldp.org site. Use this site instead, if you want to stick with the most actual version of the HOWTO. Blame the tldp people.
Carsten (C DOT Lueth AT fielmann DOT com) has found a variant for MS Windows (TM) systems.
Update on used kernel versions, warning about remote administering, netfilter debugging code. New translation available: French (link c. f. above). Discontinued german version.
links about ebtables have been updated in the "Related Topics" Section. Added note about "false positive" br-nf debugging output.
Added section Actual configuration and hints about routing in Setting up the routing, Ping it, Jim! , resp.
Ethernet bridges connect two or more distinct ethernet segments transparently.
An ethernet bridge distributes ethernet frames coming in on one port to other
ports associated to the bridge interface. This is accomplished with
brain: Whenever the bridge knows on which port the MAC address to which the
frame is to be delivered is located it forwards this frame only to this only
port instead of polluting all ports together.
Ethernet interfaces can be added to an existing bridge interface and become then (logical) ports of the bridge interface.
Putting a netfilter structure on top of a bridge interface renders the bridge capable of servicing filtering mechanisms. This way, a transparent filtering instance can be created. It even needs no IP address assigned to work. Of course, you can assign an IP address to the bridge interface for maintenance purposes ( certainly, with ssh only ;-).
The advantage of this system is evident. Transparency alleviates the network administrator of the pain of restructuring the network topology. And users may not notice the existence of the bridge but their connection beeing blocked. Also, users are not disturbed while working (think of a company where network connection loss pays alot).
The other common case is a client beeing connected to the global web via a leased router. As the providers seldomly grant administration privileges on their leasing hardware, the client cannot change the interconnecting configuration. But, of course, the client has a network running, and wants to spend at least as possible, he does not want to reconfigure his entire network. And he does not need to if he uses a bridging device.
This software setup is needed on the ethernet bridge computer. According to our Testing grounds.
Use of kernel 2.6 is not yet a good idea. Yes, it's astonishing. The why the
bridging code
breaks and where it does so has not yet come to my and others attention, I
cannot recommend kernels of the 2.6 series. You have the clou? Assure yourself
the credit, mail the solution to me (e-mail address at entry page).
See also
Kernel-Notes for additional
information on this. So far, use kernel 2.4 series.
As of kernel version 2.4.18 there's already support for the Ethernet Bridge
capability built-in. No patches needed so far.
Regarding later kernel versions, it must be stated that 2.4.23 might be less recommendable, especially in conjunction with ebtables and netfilter-bridging. Later versions seem advisable.
The following paragraph is outdated now (2005-07-12) as all we need is present in kernel. You may skip this paragraph, it is only retained for legacy:
But if we intend to use netfilter capabilities, because we want to run iptables on our new Linux router/fw box, we still need to apply a patch.
Any patches needed can be found and downloaded on the
sourceforge Ethernet Bridge homepage.
root@bridge:~> cd /usr/src/
root@bridge:~> wget -c http://bridge.sourceforge.net/devel/bridge-nf/bridge-nf-0.0.7-against-2.4.18.diff
root@bridge:~> cd /usr/src/linux/
root@bridge:~> patch -p1 -i ../bridge-nf/bridge-nf-0.0.7-against-2.4.18.diff
Supposedly we want netfilter support on our bridge interface and we have already patched the vanillal kernel we may now activate some necessary kernel configuration items. On how to build a private kernel image see the CD-Net-Install-HOWTO, Toolbox. Oh, yeah, it's still in German only. Hm, I should fix this some time, but time lacks... Any volunteers? (deadly silence is cracking.. ;)
Nevertheless, we start by now: In
Code maturity level options
[*] Prompt for development and/or incomplete code/drivers
Loadable module support
[*] Enable loadable module support
[*] Set version information on all module symbols
[*] Kernel module loader
Networking options
[*] Network packet filtering (replaces ipchains)
[ ] Network packet filtering debugging
Previously, the above debugging option had been selected. For now,
unless you want your /var/log/-partition being filled up in
short-time distance, deactivate this option.
If this options is activated, messages similar to the following appear
in counts of thousands in dmesg and /var/log/{kern.log,debug,syslog,messages}:
skb: pf=2 (unowned) dev=br0 len=52
PROTO=6 156.136.32.121:3709 192.168.101.2:112 L=52 S=0x00 I=35470 F=0x4000 T=51
nf_hook: hook 1 already set.
skb: pf=2 (unowned) dev=br0 len=52
PROTO=6 156.136.32.121:3709 192.168.101.2:112 L=52 S=0x00 I=35470 F=0x4000 T=51
nf_hook: hook 0 already set.
skb: pf=2 (unowned) dev=br0 len=52
PROTO=6 192.168.101.11:2828 192.168.101.2:202 L=52 S=0x10 I=63 F=0x4000 T=64
nf_hook: hook 1 already set.
skb: pf=2 (unowned) dev=br0 len=52
PROTO=6 192.168.101.11:2828 192.168.101.2:202 L=52 S=0x10 I=63 F=0x4000 T=64
nf_hook: hook 3 already set.
skb: pf=7 (owned) dev=eth1 len=1500
Furthermore, in
IP: Netfilter Configuration --->
<M> 802.1d Ethernet Bridging
[*] netfilter (firewalling) support
The above entry is available only if we successfully patched our kernel!
Finally, we just need a successful
root@bridge:~> make dep clean bzImage modules modules_install
/etc/lilo.conf and do
root@bridge:~> lilo -t
root@bridge:~> lilo
root@bridge:~> reboot
Perhaps we might mark our new kernel as the bridge kernel? We
vi the toplevel Makefile in our kernel sources and edit the head
line called EXTRAVERSION =.
We may actually set it to, say bridge? ;-)
After the modules_install we find the fresh modules in
/lib/modules/2.4.18bridge
For debian users (eventually use export PATCH_THE_KERNEL=YES
before and --added_patches your_patches with make-kpkg):
root@bridge:~> make-kpkg --revision=tf.1.0 kernel_image
brctl
Once our kernel has the capabilities needed to perform Ethernet Bridge and netfilter
actions, we prepare the user space tool brctl. brctl is the configuration
tool we use to
set up anything to suit our needs.
We download the source tarball, unpack it and change directory into it.
root@bridge:~> wget -c http://bridge.sourceforge.net/bridge-utils/bridge-utils-0.9.5.tar.gz
root@bridge:~> tar xvzf bridge-utils-0.9.5.tar.gz
root@bridge:~> cd bridge-utils-0.9.5
README and the files in the doc/ subdirectory.
Then do a simple make and copy the resulting brctl/brctl executable to
/sbin/.
root@bridge:~> make
root@bridge:~> cp -vi brctl/brctl /sbin/
Symptom: Anything during setup works but packets do no longer traverse as they did in 2.4 the bridge interfaces.
ipuk s (qasuari_ @ _yahoo.com) wrote (about june 2005):
[...]
I have to compile my kernel from 2.4.18-14 to 2.6.0 and activate
bridge-netfilter&ebtables.
After compiling, i can't ping from a host to interface of linux box.
Linux box just have 1 interface.whats wrong with my compilation ???
[...]
We need Linux to know about the bridge. First tell it that we want one virtual
ethernet bridge interface: (this is to be executed on host bridge, of course.
See
Testing grounds)
root@bridge:~> brctl addbr br0
root@bridge:~> brctl stp br0 off
br0.
root@bridge:~> brctl addif br0 eth0
root@bridge:~> brctl addif br0 eth1
People sent me emails that it would have helped them if I stressed more
clearly the risk of being cut off. So listen at this point to my
warnings:
If you read this, you are one (small) step before you _might_ cut
yourself off your box you are going to subverse to a bridging device.
If you love living on bleeding edges, it is now the instant to prepare
your first aid material. You will likely need it.
If you do not have physical access, nor does another person within your
range:
DO NOT PROCEED UNLESS YOUR FINGERS LEFT THE KEYBOARD IN FRONT OF YOU
AND YOUR EYES FIXED REFLECTIVELY SOMETHING OTHER THAN YOUR CONSOLE.
You have been warned, now. No responsability is assumed for anything
at all.
root@bridge:~> ifconfig eth0 down
root@bridge:~> ifconfig eth1 down
root@bridge:~> ifconfig eth0 0.0.0.0 up
root@bridge:~> ifconfig eth1 0.0.0.0 up
We tell Linux the new (logical) interface and associate one single IP with it:
root@bridge:~> ifconfig br0 10.0.3.129 up
In case we are configuring a gateway we enable the forwarding in the linux kernel.
root@bridge:~> echo "1" > /proc/sys/net/ipv4/ip_forward
root@bridge:~> route add default gw 10.0.3.129
Aka: We need the changes to persist reboots.
To do so, you need some sh-style script and put this in the appropriate
system boot-up directory: /etc/init.d/
Secondly, you create the link in your runlevel directory.
The correct directory depends on your gusto and of course on your linux
distribution.
Common runlevel values on workstations are 2, 3 and 5.
Examples are: /etc/rc?.d/ (replace the ? with the right runlevel)
Also, you need an idea as when your network interfaces are torn up.
For now, we assume, your network interfaces are activated at system priority
S so we need not to care of.
If you ever should feel the need to know exactly, look in /etc/rcS.d/.
We just want the bridge to be up and operable as soon as possible and so chose
our priority to be 10. (Make sure, no service requiring bridging devices
is started before, read: with priority-values less than 10)
For now, we assume, your runlevel is 5:
root@bridge:~> mv -i bridge.sh /etc/init.d/
root@bridge:~> cd /etc/rc5.d/
root@bridge:~> ln -s ../init.d/bridge.sh S10bridge.sh
#!/bin/bash
PATH="/sbin:/usr/sbin:/usr/local/sbin";
slaveIfs="1 2 3 4 6 7 8 9 10";
cmd="$1";
[ -z "$cmd" ] && cmd="start";
case "$cmd" in
start)
brctl addbr br0;
brctl stp br0 on;
brctl addif br0 eth0;
brctl addif br0 eth1;
(ifdown eth0 1>/dev/null 2>&1;);
(ifdown eth1 1>/dev/null 2>&1;);
ifconfig eth0 0.0.0.0 up;
ifconfig eth1 0.0.0.0 up;
ifconfig br0 10.0.3.129 broadcast 10.0.3.255 netmask 255.255.255.0 up ### Adapt to your needs.
route add default gw 10.0.3.129; ### Adapt to your needs.
for file in br0 eth0 eth1;
do
echo "1" > /proc/sys/net/ipv4/conf/${file}/proxy_arp;
echo "1" > /proc/sys/net/ipv4/conf/${file}/forwarding;
done;
echo "1" > /proc/sys/net/ipv4/ip_forward;
;;
stop)
brctl delif br0 eth0;
brctl delif br0 eth1;
ifconfig br0 down;
brctl delbr br0;
#ifup eth0; ### Adapt to your needs.
#ifup eth1; ### Adapt to your needs.
;;
restart,reload)
$0 stop;
sleep 3;
$0 start;
;;
esac;
root@bridge:~> chmod 700 /etc/init.d/bridge.sh
We imagine this scenario or similar:
/\
Ethernet Ethernet ATM /-/ \
--------- --------- --------- /-/ |
| Box |----------|Bridge |----------|Router |-----| Inter- \
--------- --------- --------- \ net ---|
^ ^ ^ ^ \ /
| | | | \---/
eth0 eth0 eth1 if0 ^
| | | | |
10.0.3.2 none/10.0.3.1 195.137.15.7 anything else
\ /
\ /
^ \-br0-/
| ^ ^
| ^ | |
| | | |
own own foreign hostile
own, the Router is
completely off-limits and so is the Internet, of course.We will configure the Box' eth0 as usual. The bridge's interfaces
are configured as described in
Setup.
If we are to use forwarding we might perhaps do this one: ;-)
root@bridge:~> echo "1" > /proc/sys/net/ipv4/ip_forward
root@bridge:~> route add default gw 10.0.3.129
bridge:
root@bridge:~> iptables -P FORWARD DROP
root@bridge:~> iptables -F FORWARD
root@bridge:~> iptables -I FORWARD -j ACCEPT
root@bridge:~> iptables -I FORWARD -j LOG
root@bridge:~> iptables -I FORWARD -j DROP
root@bridge:~> iptables -A FORWARD -j DROP
root@bridge:~> iptables -x -v --line-numbers -L FORWARD
Chain FORWARD (policy DROP 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
1 0 0 DROP all -- any any anywhere anywhere
2 0 0 LOG all -- any any anywhere anywhere LOG level warning
3 0 0 ACCEPT all -- any any anywhere anywhere
4 0 0 DROP all -- any any anywhere anywhere
LOG target logs every packet via syslogd. Beware, this is intended for
testing purposes only, remove in production environment. Else you end up either with
filled logs and harddisk partitions by you yourself or anyone else does this Denial
of Service to you. You've been warned.box:
root@box:~> ping -c 3 195.137.15.7
PING router.provider.net (195.137.15.7) from 10.0.3.2 : 56(84) bytes of data.
--- router.provider.net ping statistics ---
3 packets transmitted, 0 received, 100% loss, time 2020ms
^C
root@box:~>
DROP everything. No response, no logged packet. This netfilter
setup is designed to DROP all packets unless we delete the rule that drops every
packet (rule no. 1 above) before the LOG target matches:
root@bridge:~> iptables -D FORWARD 1
root@bridge:~> iptables -x -v --line-numbers -L FORWARD
Chain FORWARD (policy DROP 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
2 0 0 LOG all -- any any anywhere anywhere LOG level warning
3 0 0 ACCEPT all -- any any anywhere anywhere
4 0 0 DROP all -- any any anywhere anywhere
box:
root@box:~> ping -c 3 195.137.15.7
PING router.provider.net (195.137.15.7) from 10.0.3.2 : 56(84) bytes of data.
64 bytes from router.provider.net (195.137.15.7): icmp_seq=1 ttl=255 time=0.103 ms
64 bytes from router.provider.net (195.137.15.7): icmp_seq=2 ttl=255 time=0.082 ms
64 bytes from router.provider.net (195.137.15.7): icmp_seq=3 ttl=255 time=0.083 ms
--- router.provider.net ping statistics ---
3 packets transmitted, 3 received, 0% loss, time 2002ms
rtt min/avg/max/mdev = 0.082/0.089/0.103/0.012 ms
root@box:~>
When we just fired up the bridge interface it takes about roughly 30 seconds
until the bridge is fully operational. This is due the 30-seconds-learning phase
of the bridge interface. During this phase, the bridge ports are learning what
MAC addresses exist on what port. The bridge author, Lennert, tells us in his
TODO file, the 30-seconds-learning phase is subjected to some improvement in a
timely manner some time.
During the test phase, no packet will we forwarded. No ping be answered.
Remind this!
This section is intended to give you, dear reader, some hints about how your system should look and feel after having processed this howto successfully.
The output of your ifconfig command might look similar to
this:
root@bridge:~> ifconfig
br0 Link encap:Ethernet HWaddr 00:04:75:81:D2:1D
inet addr:10.0.3.129 Bcast:195.30.198.255 Mask:255.255.255.128
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:826 errors:0 dropped:0 overruns:0 frame:0
TX packets:737 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:161180 (157.4 Kb) TX bytes:66708 (65.1 Kb)
eth0 Link encap:Ethernet HWaddr 00:04:75:81:ED:B7
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5729 errors:0 dropped:0 overruns:0 frame:0
TX packets:3115 errors:0 dropped:0 overruns:0 carrier:656
collisions:0 txqueuelen:100
RX bytes:1922290 (1.8 Mb) TX bytes:298837 (291.8 Kb)
Interrupt:11 Base address:0xe400
eth1 Link encap:Ethernet HWaddr 00:04:75:81:D2:1D
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:1 frame:0
TX packets:243 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:342 (342.0 b) TX bytes:48379 (47.2 Kb)
Interrupt:7 Base address:0xe800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1034 errors:0 dropped:0 overruns:0 frame:0
TX packets:1034 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:82068 (80.1 Kb) TX bytes:82068 (80.1 Kb)
The output of your route command might look similar to
this:
root@bridge:~> route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.0.3.129 0.0.0.0 255.255.255.128 U 0 0 0 br0
0.0.0.0 10.0.3.129 0.0.0.0 UG 0 0 0 br0
root@bridge:~>
Please have a look at the Ping it, Jim! section.
I'd like to hear from you! :-)
Did you enjoy the trip?
Do you miss anything?
Need help? (Call you local assistant ;-) or rtfm.
You are still online? Then drop me a msg via email. I'd be really glad.
Wanna send me a cheque? Pitty, Don't accept these.. (Just kidding;)
Make it worth my time, just send me some nice words, that's enough.
Nothing motivates more than happy participants giving you valuable feedback.
So, go on, invest a minute and hack me a mail!
Thank you!
Nils
Apparently, there must have been a bug in the br-nf code:
From: Bart De Schuymer <bart.de.schuymer_@_pandora.be>
Date: Sun, 1 Sep 2002 21:52:46 +0200
To: Nils Radtke <Nils.Radtke_@_Think-Future.de>
Subject: Re: Ethernet-Brigde-netfilter-HOWTO
Hello Nils,
[...]
Also, network packet filtering debugging is generally a bad idea with the
br-nf patch. It can gives a lot of false warnings (about bugs) in the logs.
[...]
Personally, I never had false positives in my log. Maybe, that bug has been fixed. This mailed to Bart, he wrote:
From: Bart De Schuymer <bart.de.schuymer_@_pandora.be>
Date: Mon, 2 Sep 2002 18:30:25 +0200
To: Nils Radtke <Nils.Radtke_@_Think-Future.de>
Subject: Re: Ethernet-Brigde-netfilter-HOWTO
On Monday 02 September 2002 00:39, Nils Radtke wrote:
> Will the revision of the nf-debug code in br-nf be subject of improvement?
I must admit I haven't been running any kernel with netfilter debugging
lately. It sure used to give false positives a few months ago (the bridge
mailing list has posts about that), I've been lacking time to see why and if
it is still the case. It's on my todo list.
[...]
James Dinkel (jdinkel_ @ _gmail.com) wrote on Tue, 8 Mar 2005 10:59:22 -0600:
[...]
I am using Fedora Core 3 and all I had to do was "yum install bridge-utils"
to use the brctl command. I didn't have to do any kernel recompiling or
configurations or messing with kernel modules.
It was very easy.
[...]
The Howto's author may be contacted via
e-mail.
Howto Author's homepage.
Ethernet Bridge Mailinglist
Home of Linux kernel Ethernet Bridge
Bridge-STP-HOWTO
Firewalling for Free, Shawn Grimes
ebtables, sourceforge
ebtables, supported featuresebtables, examples:
basic,
advanced
IP mode, LVS
High-Availability Linux
LVS