"Linux Gazette...making Linux just a little more fun!"

 

Set your browser as wide as you'd like now.  I've fixed the Muse to expand to fill the aviailable space! © 1998 by mjh

 

muse:  v; to become absorbed in thought  n; [ fr. Any of the nine sister goddesses of learning and the arts in Greek Mythology ]: a source of inspiration   elcome to the Graphics Muse! Why a "muse"? Well, except for the sisters aspect, the above definitions are pretty much the way I'd describe my own interest in computer graphics: it keeps me deep in thought and it is a daily source of inspiration.  [Graphics Mews][WebWonderings][Musings] [Resources]

There were plenty of graphics related news announcements since the last Muse.  Unfortunately, I just didn't keep up with them and they've expired from my news feed.  So what I've got this month is pretty recent info.  I did hang onto a few tidbits from mailing lists I've been scanning, plus email from a few readers.  It's funny - I get email about really old versions of the Muse every now and then.  I think people are still just finding out about it.
 
In this month's column I'll be covering ...

• creating dynamic web pages with msql and CGI.pm
• Gimp 1.0 - well, just a little.

        Disclaimer: Before I get too far into this I should note that any of the news items I post in this section are just that - news. Either I happened to run across them via some mailing list I was on, via some Usenet newsgroup, or via email from someone. I'm not necessarily endorsing these products (some of which may be commercial), I'm just letting you know I'd heard about them in the past month.
 

Xi Graphics releases fully integrated Linux distribution This isn't really graphics related, but Xi is an X server vendor.  And X server vendors are pretty important to the Linux graphics world.  So, here it is.  Xi Graphics is now providing a commercial Linux distribution which includes their Accelerated X server and their maximum/CDE desktop product.  Unit price is $214.95 for the Executive Edition and $364.95 for the Developers Edition.  For more details:  Kyle Fink  Xi Graphics  (303) 298-7478  [email protected]		Panasonic PalmCam utility Fredrik Roubert has released a very early version (v0.3) of a driver for the Panasonic PalmCam, an NV-DC1000 digital camera.  According to Robert a couple of the features include the ability to specify ranges to download and to preview or delete several images in one session.  For more information, check out his web page at  http://www.df.lth.se/~roubert /NV-DC1000.html  The package is available from the following sites:  ftp://ftp.df.lth.se/ pub/users/roubert/Linux  ftp://sunsite.unc.edu/ pub/Linux/apps/graphics/capture
Linux / 3-D SIGGRAPH Report At SIGGRAPH '98 in Orlando, Florida Daryll Strauss and Brian Paul organized a special interest group (SIG) session to talk  about Linux, 3-D hardware acceleration, and related topics.  Attendence was greater than expected with 100-150 people attending.  A summary of presentations taken by Brian Paul, author of the Mesa package, can be found at  http://glide.xxedgexx.com/ SIGNotes.html  Blender News There were a number of updates to Blender, the 3D modelling page from NeoGeo.  Here is a snapshot of annoucements from their News page:  Blender manual (1998-07-10)  All information you need, packed in cool design at paper: the Blender 1.5 manual is scheduled to ship in October. Information about pricing and pre-ordering will be available in August.  The Unofficial Blender Mailing list (1998-06-16)  To subscribe: send mail to [email protected] with the text  subscribe blender3d [email protected]  To post, send your message to [email protected] Version 1.34 for Linux/FreeBSD available today. (1998-06-04)  Many bugs fixed and included some features: Play (flipbook). Use it for playback test animations (Hamx) Frame counter during anim playback.  Read the BlenderBeta page for more.		Linux IEEE-1394 (FireWire) Subsystem - Status report Emanuel Pirker is working on the Linux IEEE-1394 (FireWire) Subsystem for a while now and thought it would be a good idea to give a small status report.  IEEE-1394 is the name of a high-speed but low-cost serial bus. Apple has trademarked it as "FireWire". Current implementations reach 200 Mbit/s, soon we will have 400 and then 800 and so on. FireWire is designed for consumer multimedia (e. g. connecting a digital video camera to your PC) and high-speed peripherals (hard disks, CD ROMs, but also scanners, printers). Since it provides quality of service (guaranteed bandwith and bounded latency) it can also be used in industrial real-time applications.  Support for Windows (NT) and Rhapsody is coming (some items are already operational) but Linux users also want to benefit from this technology - so Emanual started the development as a university project last winter.  He now has a clearly designed subsystem, an Adaptec AIC-5800 driver and some code to test it. Not all FireWire functions can be used now but he has reached a point where the API is stable and other people can also contribute work (e.g. a video camera driver).  So if you are interested in this, just email Emanual - more (wo)manpower is desperately needed.  Contact addresses:  WWW:  http://www.edu.uni-klu.ac.at/ ~epirker/ieee1394/  E-Mail: [email protected]       Some late entries:  ImageMagick 4.0.8  Panard Vision - Portable Real-time 3D Engine for Linux  Mesa 3.0 beta 7  SANE 0.74  FreeWRL 0.14  For more details on these, check out Freshmeat.net.

XVScan 1.80 Scanning software

XVScan is based on the popular xv image manipulation software for X Windows and includes a fully licensed copy of xv. It is source available commercial software.

If you've never used John Bradley's XV image manipulation software, it's difficult to describe how powerful it is. XV reads and writes files in a dozen different formats, provides powerful color-map editing, window capture, color-space conversion, cropping, image manipulation algorithms, and the list goes on.

XV gives you powerful image and color-map manipulation, support for over a dozen image formats, as well as the Visual Schnauzer, and an easy to use graphical interface to view and catalog your scanned images.  Supported images formats include: PNG, GIF, JPEG, progressive JPEG, TIFF (compressed and uncompressed), PostScript (requires ghostscript), PBM/PGM/PPM (raw and ascii), X11 Bitmap, XPM (X PixMap), Sun Rasterfile,

With XVScan, you now have the ability to scan directly into XV in a very cost efficient (and more importantly time efficient) manner.

See our website http://www.tummy.com/xvscan/ for a full list of supported scanners.

What's New in Version 1.80

1. Microtek ScanMaker E3 and E6 support
2. HP ScanJet 5P push button scanning
3. Updated JPEG and TIFF conversions

The current version of XVScan is 1.80 dated 1998-06-11 based upon XV version 3.10a dated 12/29/94.

XVScan is $US50 for Linux, HP-UX, FreeBSD and BSD/OS for free ftp delivery. XVScan is $US80 for Solaris bundled with SGLite SCSI driver.  CD-ROM Media $US20. Contact [email protected] to order or order on the web at https://www.tummy.com/ordering/onlineorder.phtml.  Payment accepted via check, Visa/Mastercard/Discover/AMEX cards.

Contact tummy.com, ltd, phone: (970) 223-8215, fax: (408) 490-2728,
URL: <http://www.tummy.com/xvscan/>
email: <[email protected]>

S.u.S.E. releases new X servers for Rendition, Cyrix, SiS and 3DLabs

To avoid confusion and to clearly state that these servers are part of XFree86, S.u.S.E. has changed the naming scheme of its servers. Instead of the XSuSE prefix, they now use XFCom, which is short for XFree86 Compliant.  XFree86 compliance is intended to mean that the sources for these servers are ALREADY part of the XFree86 development sources and will be released as part of one of the next XFree86 releases.  This is the major difference to servers with the XBF prefix, which stands for X Binary Free and means that sources for these servers are only available under NDA and therefore cannot be included in XFree86.

Following this naming scheme, we have renamed the XSuSE_Elsa_GLoria server to XFCom_3DLabs and XSuSE_SiS to XFCom_SiS. Additionally, we have added to new servers that support the very popular Rendition Verite chipsets and the all-in-one Cyrix MediaGX CPU that includes graphics functionality.

XFCom_Rendition supports the Rendition Verite V1000, V2100 and V2200 chips.  Among the boards supported are

• miroCRYSTAL VRX
• Diamond Stealth II S220
• Hercules Thriller3D
• Creative Labs 3D Blaster PCI
• Canopus Total-3D
• Sierra Screaming 3D

XFCom_SiS supports

• SiS 6201
• SiS 6202
• SiS 6205
• SiS 5597
• SiS 5598

• GLINT 500TX + GLINT Delta + IBM RGB 526DB
• Elsa GLoria L
• Diamond Fire GL 3000
• GLINT MX + GLINT Delta + IBM RGB 526DB
• Elsa GLoria L/MX
• Permedia + GLINT Delta + IBM RGB 526DB
• Elsa GLoria S
• Diamond Fire GL 1000
• Permedia 2
• Elsa GLoria Synergy
• Elsa Winner 2000/Office
• Diamond Fire GL 1000 PRO
• Creative Blaster Exxtreme
• Leadtek WinFast 2300
• Accelstar Permedia II

Binaries for other operating systems as well as glibc binaries will be released, soon.  For all questions and support concerning these servers please do NOT contact XFree86 but send email to [email protected] instead.

Did You Know?

As I understand, in a cinema, the width is twice as long as the height.

No, that's not really true.  The most commonly used formats are:

So most common cinama formats are not twice as wide as high, only Cinemascope is more than twice as wide as it is high. But this format is not as common as some people think. It requires a special aspherical distortion lens on both the projector and the camera.

As far as I remember the scenes for Jurassic Park were rendered in 8000x6000 (1:1.33), but often much less is sufficient, like 4000x3000.

Again, Bernd Sieker supplies an answer:

These are the two most common colour encoding stamdards for television. NTSC is used in the United States and, I think, Japan, PAL is used in most parts of Western Europe (except France. There is a third standard, called SECAM, which is used in France and parts of Eastern Europe.

PAL and SECAM use 50 fields/s (a field is half a frame), NTSC uses 60 fields/s and fewer lines, so the bandwidth of the signals is almost equal in all formats (Something on the order of 5 MHz).

For TV the horizontal resolution is not fixed, whereas the number of lines is; use the following for sqaure pixel aspect ratio:

PAL:  768x576
NTSC: 640x480

Note that the number of lines are fixed and should not be altered, all systems work with these values.
 

Q and A

A:  Juergen Schlag responded:

A few months ago I tried to set up my Wacom PenPartner with X11.  You need to configure your system like the following:

• run Linux with a X11 server which supports the Xinput Extension (my old S3-Board running under the XFree-Server works well, but the XSuSE-Server for PERMEDIA2-Boards doesn't work).

• install the Xinput driver for the Artpad (see the docs). I used a patched driver for the PenPartner.

• edit the Xinput-Section of your /etc/XF86Config to load the driver when X11 starts (see the man-pages for XF86Config and your X-server)

• recompile the GTK toolkit with the Xinput-support enabled. see the README and INSTALL file for the command switch to do this.

• restart your computer, start X11 and Gimp. if no error message occured your artpad should work well

Reader Mail

The polyray site seems to have moved.  It now seems to live at:
http://www.inf.fu-berlin.de/tec/software/ public/public_html/grafik/polyray.html

Check out the new home page for sceda, now called sceda II! Let me know what you think!
It's at www.tls.com/mbeast.

You might be interested to add this little programm to your list of Unix 3D graphics utilities - it generates fractal asteroids using a few parameters given to it on the command line.
http://star.arm.ac.uk/~spm/ asteroid_impact/gen_asteroid.c

Regarding the page http://www.graphics-muse.org/linux/lgh.html, in the section Creation Tools, you mention that:

"If you wish to write shaders in BMRT, you really need The Renderman Companion book by Steve Upstill which is available from Addison Wesley.  This text also describes the RIB format.  Shaders in BMRT are just text files written in the Renderman Shading Language (described in the book - it's a subset of C); the shader is run through the BMRT shader compiler "slc" and then it can be used in your renderings."
I would point out a couple of inaccuracies if I may.  First, Mr. Upstill's book completely ignores the RIB format; he concentrates exclusively on the procedural binding (i.e. the C-language API).  Secondly, regarding the Renderman Shading Language, Mr. Upstill writes:
 
"The most obvious characteristic of this shader is a superficial resemblance to a function in the C programming language."...
"This makes the shading language easier to learn, but one must beware of assuming the shading language is C."

The text makes it clear that, while there are some syntactic similarities between the two languages, the RSL is *not* a "subset of C".

Finally, I would recommend that anyone wanting to learn to write shaders for Renderman read, in addition to the Renderman Companion, Texturing and Modelling:  A Procedural Approach by David S. Ebert et al. It is a much more thorough and intensive work on procedural texturing than is RC, and uses examples written almost exclusively in the Renderman Shading Language.

Hope this helps. Keep up the good work.

Roderick A. Anderson asked about converting GIF's to interlaced GIF's.

Are there any programs that run on a Linux platform to convert GIFs to an interlaced format?  Free first (of course),then commercial, then

hostageware or some variation.  I've been too busy to upgrade my system to RedHat Linux 5.0 (semester is almost over soon) so I haven't been able to try a recent version of gimp. (The version I have is less powerful then xpaint.)

Building dynamic web pages

I used to pride myself on the number of languages I had taught myself over the years.  In recent times, however, I've found myself falling behind the curve, having grown comfortable and satisfied with C.  Although I still think C suffices for most projects I realize that I need to move on to newer, object oriented, languages.  I hate C++.  I've done a little work with it and it's just a perversion of C in my eyes.  Java is my long term goal, primarily because I make a living doing graphical interfaces and Java is the future for people like me.  Perl, on the other hand, is simply the tool of choice for the Web.  I didn't want to learn yet another scripting language, but it's hard to avoid if I'm going to try to do Web developement.  So, Perl it is.

Fortunately, creating dynamic Web pages with Perl turns out to be pretty simple.  A perl module called, conveniently, Msql allows me easy access to my databases and the CGI.pm module makes generation of HTML a breeze.  Both the msql database and CGI.pm have printed texts available so learning both is a bit easier than the traditional man-page browsing with which I've grown up.  We'll take a look at how we can use both the Msql and CGI.pm modules to create a very simple dynamic page.

This discussion does not expect you to understand how to program in perl, but it would help.  We're going to step through the process without going into huge detail here.  Also, when I talk about the database I'll use lowercase - msql - but when I talk about the perl module I'll use uppercase - Msql.  You should, however, be a little familiar with how SQL statements look, or at least not be afraid of looking at them.  What we'll use in this example is pretty basic and you should be able to interpret what's going on from the code and the explanations.

First, what tools do you need for this experiment?

Perl 5.003 patchlevel 7 or higher
msql 1.0.x
CGI.pm 2.38
The Msql module

Ok, now let's create a simple database.  Make sure the msql database is installed properly (follow the directions with the package - it's pretty straightforward to build and install).  Start the database daemon:

% msqld&

% msqladmin create muse

# drop existing table.  If it doesn't exist, msql will basically ignore this.
drop table tools
\g

# Create a new table in the database
create table tools (
   tooltype     int not null,                 # 0: hand tool;  1: power tool
   toolname     char(255) not null            # name of the tool
)
\p\g

# Insert a few entries into the table
insert into tools values (0, 'hammer') \g
insert into tools values (0, 'screwdriver') \g
insert into tools values (1, 'table saw') \g

% msql muse < tools.msql

#!/usr/bin/perl5

# Import modules of interst.
use CGI qw/:standard :html3 :netscape/;
use Msql;

# print out the HTML HEAD section
print header,
   start_html(
      -author=>'[email protected]',
      -title=>'My Little Tools',
      -bgcolor=>'#FFFFFF', -text=>'#000000'
      );

# Open the Msql connections and select the databases of interest.
my $dbh1 = Msql->connect();
$dbh1->selectdb('muse');

Ok, you've opened the connection to the database.  Let's grab the tools table entries.

my $sth = $dbh1->query("SELECT * from tools");
my @rows;
my @result;
while (@result = $sth->fetchrow)
{
   push( @rows, td({-align=>'CENTER', -valign=>'CENTER'}, $result[1]) );
}
my $tools_list =
   table( {-border=>1, -cellpadding=>'1', -cellspacing=>'5'},
      Tr(@rows)
   );

The next two lines just define the variables rows and result to be local.  However, these variables will both be list variables.  Lists are special in perl - you can access all the entries in the list using the @ symbol as a prefix, or you can access individual elements of the list by prefixing the variable name with a $ symbol and using an array element number.  We'll see examples of both in a moment.

The next 4 lines are a while() loop that process each row returned from our SELECT query.  The fetchrow() method is used to assign the current row to the @result list.  A row, of course, consists of two entries:  the tooltype and the toolname.   The push() line says to append the following to the @rows list:

td({-align=>'CENTER', -valign=>'CENTER'}, $result[1])

Below the while() loop is another local variable, tools_list.  This variable will be used to output a table in our page.  The table() function comes from CGI.pm and is used to generate a table.  Note that neither this nor the td() functions in the while() loop have actually been output yet.  We're just storing these in variables for later output.  Again, the curly braces enclose arguments for the table HTML tag.  After that is another embedded CGI.pm function - Tr().  This function has an uppercase first letter only because perl has its own "tr" function and there needs to be a distinction between the two.  In most cases, the CGI.pm functions will use lowercase only.  The Tr() function creates a table row.  Embedded within this is are all the table elements we stuffed into the @rows list.  Still with me?  Great!  All that's left is to output this back to the browser.

# Now print the complete table
print
   center(
   table(
      {-border=>1, -width=>'100%', -cellpadding=>1, -cellspacing=>5},

      Tr(
         td({-align=>'CENTER', -valign=>'CENTER'}, $tools_list),
      )
   )
);

# End of HTML output.
print end_html;

Save all this to a file called web.pl in your cgi-bin directory on your web server.  Make sure the script has execute permissions.  You can see this little scripts output by accessing www.graphics-muse.org/cgi-bin/web.pl.  It's not much, but it shows how easy it is to integrate a little bit of database info into a web page.  For what it's worth, it only took me about 2 days to get all this down, mostly by experimenting with examples in the printed texts.   It would have been quicker, but I did it at work and ducking from coworkers took most of my time.

Speaking of documentation, the texts you want are

• Offical Guide to Programming with CGI.pm by Lincoln Stein, published by Wiley Press.
• Official Guide to MiniSQL 2.0 by Briand Jepson and David J. Hughes, by Wiley Press.

Gimp 1.0 For those of you who have been  living under a rock tied up and held captive by aliens or changing your oil for the past 3 months I have news for you:  Gimp 1.0 has been released.  The announcement came back on June 5th.  Since I haven't done a 'Muse column since April perhaps you missed it.  For some reason the trumpets didn't seem to blare as loud as I expected they might when the announcement hit the mailing lists and comp.os.linux.announce.  I guess I expected more fanfare.  Maybe there was and I missed it.  I was changing my oil for a while back then, too.  Or maybe that was the month I was with the aliens.  It's been a long summer.  As I mentioned at the top of this column (you know, the part you probably don't read each month), I've spent the last year working on a book on the Gimp.  SSC, the publishers of the Linux Journal and the host of the Linux Gazette, had contacted me in June of 1997 about the possibility of doing the book.  I thought it was a great idea, so I jumped into it.  The hard part has been trying to keep the work up to date.  Much of the writing had to wait till there was some light at the end of the 1.0 development tunnel.  Not suprisingly, the past 3 months I've been buried in updates and last minute details.  This has been the longest last minue of my life.  But I'm fairly happy about the book.  It will be printed in 4-color on glossy paper and there are lots of images and examples.  There is also a CD which will include all the images from the book, plus lots of other good stuff.  There are some things I didn't get in because there just wasn't any time left.  They'll have to wait for the next edition or for articles in the Linux Journal.  Or maybe in the 'Muse.  Anyway, one year is plenty for the first edition.  Gimp 1.0 source actually comes in three packages:  the core distribution, the extras package, and the unstable package.  The core and extras package build and install fairly easy.  The unstable package includes a number of very handy plug-ins but you have to understand how to build them a little more than the core and extras packages.  Some of the more interesting features of the 1.0 release include a rather good Print plug-in that can work with a number of HP and Epson printers directly and also supports Postscript output.  So you can print directly to a postscript capable printer or run the output through Ghostscript.  -Top of next column-		More Musings...   No more musing this month.
		Another great Plug-in is the GFig plug-in, which allows you some limited drawing capabilities.  You can draw circles, curves, boxes and other shapes, repositions them, render them on separate layers using any brush shape and color.  The interface is a bit clunky, but it's still an improvement on the default drawing tools.  Other recent improvements over older development releases include:  runtime configuration via the Preferences dialog a Netscape interface to access online resources a better menu organization frequently used layer functions accessible via buttons now lots of Script-Fu scripts The Gimp has gotten quite a bit of press recently, including some blurbs in the online version of Publish magazine and on NPR (National Public Radio).  Check Zach's Gimp News site for more information on these.  There are still a few things that need work, not the least of which is support for more color models.  But this has been discussed at length on the developers list and a few people appear to be working on it, at least to some extent, for the 1.2 release.  The Gimp will have a numbering scheme like the Linux kernel, where even numbers are public releases and odd numbers are developers releases.  Currently, the 1.0.4 version is the latest public release.  There is a 1.1  I intend to focus more of my energies towards the Gimp from now on.  The 'Muse columns future depends on some discussions I'm having with SSC about another project, but for now it's just discussion.  In any case, after all this time, I finally plan on working on some plug-ins and scripts.  Since 1.0 is out, I can't whine about not having a stable version anymore.   I'll be hanging out on the Gimp-User mailing list trying to help out there.  With 1.0 out, it's time for the user community to show what can be done with the tools.    Besides, maybe we have another Gimp-based Diane Fenster out there.

Online Magazines and News sources  C|Net Tech News  Linux Weekly News  Slashdot.org  General Web Sites  Linux Graphics mini-Howto  Unix Graphics Utilities  Linux Multimedia Page  Some of the Mailing Lists and Newsgroups I keep an eye on and where I get much of the information in this column  The Gimp User and Gimp Developer Mailing Lists.  The IRTC-L discussion list  comp.graphics.rendering.raytracing  comp.graphics.rendering.renderman  comp.graphics.api.opengl  comp.os.linux.announce

Future Directions

Let me know what you'd like to hear about!

Graphics Muse #1, November 1996
Graphics Muse #2, December 1996
Graphics Muse #3, January 1997
Graphics Muse #4, February 1997
Graphics Muse #5, March 1997
Graphics Muse #6, April 1997
Graphics Muse #7, May 1997
Graphics Muse #8, June 1997
Graphics Muse #9, July 1997
Graphics Muse #10, August 1997
Graphics Muse #11, October 1997
Graphics Muse #12, December 1997
Graphics Muse #13, February 1998
Graphics Muse #14, March 1998
Graphics Muse #15, April 1998