"Linux Gazette...making Linux just a little more fun! "

Contents:

• Tcl/TK Tips
• Perl Control M Trick
• Another Emacs Control M Trick
• XTerm Title Bar Function
• More on Commenting Code in VI
• More on X Term Title Trick 2
• Bash Quick Tip
• Neat Red Hat Management Trick
• More on Find and Alternatives
• Pico Control M Trick
• Yet Another Emacs Control M Trick

Tcl/Tk Tips

Date: Tue, 03 Sep 1996 13:29:37 +0100
From: Liang Shing Ng <[email protected]>
To: [email protected]
Subject: Tcl/Tk tips NOT IN Welch's Book

I see that you just got hooked with Tcl/Tk.

I found an *OLD* way of interfacing C program with Tk scripts, which is not documented in Welch's Book.

What is it? Pipe!

My C prog (parent) create two pipes to communicate with the Tk prog (child). The Tk prog only need to use stdin and stdout without knowing that this is controlled by the C prog. This provides a much easier way than the interface procedures described in Welch.

Attached here are my C prog and my Tk prog. If you think this is worth writing a full article, please let me know. I will do that for the Gazette. :)

Cheers
Liang-Shing Ng

Description: simple C and Tk prog pair showing how to read/write with each other. example of use: C may use this Tk for graphical interface. C does some image processing, then ask Tk to display it.

C Prog:

 
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

int create_pipe(char *child, int opipe[2], int ipipe[2])
{
    pid_t pid;
    
    /* Create output pipe and input pipe  */
    if (pipe (opipe)) {
        fprintf (stderr, "Pipe failed.\n");
        return EXIT_FAILURE;
    }
    if (pipe (ipipe)) {
        fprintf (stderr, "Pipe failed.\n");
        return EXIT_FAILURE;
    }

     /* Create the child process.  */
    pid = fork ();
    if (pid == (pid_t) 0) {
        /* This is the child process.  */
        /* Child stdin is opipe[0] */
        close(0);
        dup(opipe[0]);
        close(opipe[0]);
        /* Child stdout is ipipe[1] */
        close(1);
        dup(ipipe[1]);
        close(ipipe[1]);
        /* Closed unused FD */
        close(opipe[1]);
        close(ipipe[0]);
        execlp(child, child, NULL);
    }
    else if (pid < (pid_t) 0) {
        /* The fork failed.  */
        fprintf (stderr, "Fork failed.\n");
        return EXIT_FAILURE;
    }
    return pid;
}

main(int argc, char *argv[])
{
    FILE *po, *pi;
    char s[128];
    pid_t pid;
    int opipe[2], ipipe[2];
    char buff[256];
    
    if (argc<2) {
        fprintf(stderr, "Tk display subprogram required.\n");
        fprintf(stderr, "Usage: %s display.tk\n", argv[0]);
        exit(1);
    }

    /* Change low level pipe FD to streams */
    pid=create_pipe(argv[1], opipe, ipipe);
    po=fdopen(opipe[1], "w");
    pi=fdopen(ipipe[0], "r");

    while (gets(s)!=NULL) {
        fprintf(po, "%.5s\n", s);
        fflush(po);
        fgets(buff, 256, pi);
        fprintf(stderr, "%s: %s", argv[0], buff);
    }

    /* Close output pipe and wait input pipe flush */
    fclose(po);
    fgets(buff, 256, pi);
    fprintf(stderr, "%s: %s", argv[0], buff);

    return 0;
}

---
Tk prog

 
#!/bin/sh
# the next line restarts using wish \
exec wish4.0 "$0" "$@"

proc Reader { pipe } {
    gets $pipe line
    puts stderr "tk: $line"
    puts stdout "from tk: $line"
    flush stdout
}

image create photo imb -file a.ppm
label .c -image imb
pack .c
wm geometry . +100+100
update

while { 1 } {

if {[eof stdin]} {
    exit
} else {
    fileevent stdin readable [ Reader stdin ] 
}

}

Perl Control M Trick

Date: Wed, 4 Sep 1996 17:02:40 -0700 (PDT)
From: Jonathan Gross
Subject: Perl Tip

I read the most recent issue of the gazette, and the control M issue caught my eye. Using vi or emacs is great, but if you have more than one file, you can do this:

 
perl -pi.bak -e 's/\r//g;' filelist

-----------------------  
Jonathan 

Another Emacs Control M Trick

Date: Thu, 05 Sep 1996 13:34:09 -0700
From: Earl Stutes <[email protected]>
Subject: $.02 emacs tip

Here is the way I handle the ^M in files. Put this in your .emacs:

 
(defun dos-unix ()
  (interactive)
  (goto-char (point-min))
  (while (search-forward "\r" nil t) (replace-match "")))
(defun unix-dos ()
  (interactive)
  (goto-char (point-min))
  (while (search-forward "\n" nil t) (replace-match "\r\n")))

=eas=

X Term Titlebar Function

Date: Fri, 06 Sep 1996 17:53:00 -0600
From: "Michael J. Hammel" <[email protected]>
Subject: Gazette #9 comments -- xterm title bar function

Nice job on the new Linux Gazette! I'm just scanning it and had a few notes I thought I'd pass to you.

In the mail, there are a couple of things. Jim Murphy says that the "-print" option to find is necessary to get output from the find command and follows that up with "get used to it, its *nix". Well, he's part right. Linux does require this. However, any users who work on other Unix boxes will find slight differences in some of the common CLI commands (CLI is "command line interface"). For example, "find" on Solaris does not require the -print option to get output. Just food for thought.

Second, I have an xterm title bar function that people might find useful. I'll give the code first, then explain what it does:

In your .bashrc (or .kshrc - note this only works on ksh style shells) add the following:

 
HOSTNAME=`uname -n`
if [ "$TERM" = "xterm" ] && [ "$0" = "-bash" ]
then
   ilabel () { echo -n "^[]1;$*^G"; }
   label () { echo -n "^[]2;$*^G"; }
   alias stripe='label $HOSTNAME - ${PWD#$HOME/}'
   alias stripe2='label $HOSTNAME - vi $*'
   cds () { "cd" $*; eval stripe; }
   vis () { eval stripe2; "vi" $*; eval stripe;}
   alias cd=cds
   alias vi=vis
   eval stripe
   eval ilabel "$HOSTNAME"
fi

1. when the xterm is first opened, the name of the current host is displayed in the title bar.
2. when you cd to a directory, the current path is displayed in the xterm title bar with the users $HOME directory stripped off the front end of the path (to save some space when you're somewhere in your own directory tree). The path is preceded by the current hosts network name.
3. when you use vi to edit a file the name of the file is displayed in the title bar along with the current hosts name. When you exit your vi session, the title bar reverts to the "hostname - path" format described in #2 above.

I found this very useful for all my ksh based systems because it removed the path from my shell prompt, thus saving me space for prompt commands. Since bash is a ksh compatible shell, this works quite well on standard Linux systems.

Hope everyone finds this useful.

--  
Michael J. Hammel           | 
[email protected]          | Consciousness: that annoying time between naps.
[email protected]            | 
http://www.csn.net/~mjhammel| 

More on Commenting Code in vi

Date: Mon, 09 Sep 1996 22:23:25 -0400
From: Jeff Blaine <[email protected]>
Subject: $0.02 tip - More on commenting code in vi

I'm generally ON the code I want to comment, so instead of having to find out line numbers and then perform a substitution on those lines to insert # characters, I just map my # key to "go to the beginning of the current line, go into insert mode, insert a # and a space, exit insert mode, go down one line"

You can map your # key this way (or whatever key you want to assign it to, but be careful) by putting the following in your .exrc file:

map # I# ^[j

map<SPACE>#<SPACE>I#<SPACE><Ctrl-v><ESC>j

Then all you have to do to go comment-crazy is find where you want to start and hold down your # key.

Jeff Blaine

More X Term Title Trick 2

Date: Sun, 08 Sep 1996 23:38:31 -0500
From: the Edward Blevins <[email protected]>
Subject: Re:XTerm Title Trick 2

In issue #9 of LG, one of the two cent tips is about how to put the hostname in the title of your xterm. It mentions precmd for csh, but not the bash equivalent. The way I do this in bash is as follows:

 
  if [ $TERM = 'xterm' ]
  then export PROMPT_COMMAND='echo -ne
"\033]2;"`whoami`@`hostname`"\007"'
  fi

ps the LG is GREAT! Keep up the good work. Thank you very much!

--  
the Edward Blevins 
[email protected]  

Bash Quick Tip

Date: Thu, 12 Sep 1996 14:59:41 +1000
From: Jeremy Laidman <[email protected]>
Subject: Bash Quick tip

Issue 8 had a 2c tip "There and Back!" describing a neat way to change between two directories quickly. The method was to use "cd ~-" which will set the working directory to the previous one you were in.

Bash (and several other shells I've tested) will do this without the tilde, ie "cd -". This saves me two keystrokes (including the shift key).

Cheers

---------------------------------------------------------------- 
Jeremy Laidman                          [email protected]  
Networking Consultant                            +61 0416 290866  
Canberra Institute of Technology                  +61 6 207 4272  

Neat Red Hat Management Trick

Date: Mon, 16 Sep 1996 01:33:51 -0400 (EDT)
From: Mike Acar <[email protected]>
Subject: Neat Red Hat management trick

Well, it's not really a trick per se. If you're like me, you make an attempt to keep your Red Hat system current- at least, in some respects. Tonight, looking at a man page which mentioned Linux 0.99.11 brought to mind the thought that I should upgrade my aging Red Hat 2.0 installation to something more current; fast on its heels was a curiousity about just what I have taken from where. So with a little bit of shell-play and some suggestions from my friend, the following was produced:

 
rpm -qai | grep Dist | awk -F': ' '{print $3}' | sort | uniq -c

Mike Acar, [email protected]
Bret Martin, [email protected]

--  
DZ-015 (Mike Acar)         Information Retrieval        Ministry of Information 

More on Find and Alternatives

Date: Sat, 14 Sep 1996 19:50:55 -0400 (EDT)
From: Bill Duncan <[email protected]>
Subject: find tip...

Hi Jim Murphy.
Saw your "find" tip in issue #9, and thought you might like a quicker method. I don't know about other distributions, but Slackware and Redhat come with the GNU versions of locate(1) and updatedb(1) which use an index to find the files you want. The updatedb(1) program should be run once a night from the crontab facility. To ignore certain sub-directories (like your /cdrom) use the following syntax for the crontab file:

 
41 5 * * *  updatedb --prunepaths="/tmp /var /proc /cdrom" > /dev/null 2>&1

To locate a file, just type "locate filename". The filename can also do partial matching. The search only takes a few seconds typically, and I have tens of thousands of files.

The locate(1) command also has regular expression matching, but I often just pipe it through agrep(1) (a faster grep) to narrow the search if I want. Thus:

 
  locate locate | agrep -v man

 
  ls -l `locate locate | agrep bin`

--  
Bill Duncan, VE3IED  | BeachNet  -->  http://www.beachnet.org 
[email protected] |   - Network/System Administration 
[email protected]  |   - Web Design, Hosting Services  
+1 416 693-5960      |   - System Analysis/Design/Programming 

Pico Control M Trick

Date: Sat, 14 Sep 96 09:28 PDT
From: Peter <[email protected]>
Subject: Easier ^M removal with Pico

I've been using this trick for a long time .. its a lot easier then defining macros in Emacs, too. All it requires is a recent copy of the Pico editor.

Load the file you wish to strip ^Ms from, make a small change in the file (like hitting the space bar, then delete), and save it. No more ^Ms!

Peter

Yet Another Emacs Control M Trick

Date: Tue, 24 Sep 1996 19:26:10 -0700
From: Dan Gunter <[email protected]>
Subject: re: emacs ^M trick

I'm new to emacs, so I use a very simple trick to search & replace on special characters: I cut or copy them into the paste buffer, then Meta-% and hit Control-Y to yank them back into the minibuffer. This isn't elegant, but it's very easy to remember, and seems to work for everything.

This page written and maintained by the Editor of Linux Gazette, [email protected]